Friends who have used the ultrasonic cleaning machine have not encountered the vibration phenomenon of the ultrasonic cleaning machine. So what's the reason for this phenomenon? Don't worry. Let's discuss it with you.

1、全自動超聲波清洗機使用時間比較長，換能器老化，性能衰減，維修方法可以適當加大 超聲波功率，但是這種方法會造成換能器的發熱量加大，不能根本解決問題，建議更換全部換能器。

1. The full-automatic ultrasonic cleaning machine has been used for a long time, the transducer is aging and the performance is decaying. The maintenance method can appropriately increase the ultrasonic power, but this method will increase the calorific value of the transducer, which can not fundamentally solve the problem. It is recommended to replace all the transducers.

2、部分換能器損壞，將壞的換能器更換于之匹配的換能器。

2. Some transducers are damaged. Replace the damaged transducer with the matching transducer.
            

3、電源與換能器工作點漂移，重新調整工作點。

3. The working point of power supply and transducer drifts, and the working point is readjusted.

4、全自動超聲波清洗機設計的功率小，更換或修改電源，增加換能器的數量。

4. The power of the automatic ultrasonic cleaning machine is small, so it is necessary to replace or modify the power supply and increase the number of transducers.

5、全自動超聲波清洗機工作環境，比如清洗劑種類，清洗溫度，液位深淺等的影響。

5. Automatic ultrasonic cleaning machine working environment, such as cleaning agent type, cleaning temperature, liquid level, etc.

6、其他不明情況引起的超聲波減弱，比如清洗物的擺放方式，清洗劑的更換等。

6. Other unknown causes of ultrasonic weakening, such as the placement of cleaning materials, cleaning agent replacement, etc.

以上就是關于“如何解決全自動超聲波清洗機的震動問題？”的介紹，希望對大家有所幫助，如想了解更多資訊內容請點擊：全自動超聲波清洗機廠家http://m.022dykj.com。

The above is about "how to solve the vibration problem of automatic ultrasonic cleaning machine?" For more information, please click: automatic ultrasonic cleaning machine manufacturer http://m.022dykj.com 。